Condensateurs céramique multicouches 0402 certifiés ESA QPL

Les gammes CEC et CNC de condensateurs céramique multicouches ont obtenu la certification QPL pour les tailles de boîtier 0402. Il s’agit de la taille de boîtier la plus petite ayant obtenu la certification QPL de l’ESA.


Les gammes de condensateurs céramique multicouches basse tension pour montage en surface, CEC19 et CNC19, ont obtenu le statut QPL respectivement selon les critères de l’ESCC 3009/042 et 3009/043. Les tailles de boîtier 0402 certifiées QPL sont disponibles de 10V à 25V, permettant un gain d’espace substantiel et un meilleur rendement. Les condensateurs céramiques d’Exxelia sont désormais certifiés QPL pour les tailles de boîtier de 0402 à 2220, de 10V à 100V.

Les condensateurs CEC sont réalisés avec le diélectrique NPO (type 1) reconnu pour sa très grande stabilité en tension et en température. Les CNC sont réalisés avec le diélectrique X7R (type2) qui offre la possibilité d’atteindre de fortes valeurs de capacité. Les versions avec des terminaisons polymères sont également certifiées QPL.

Ces condensateurs chips polyvalents sont développés pour être utilisés dans une multitude d’applications nécessitant une fiabilité à toute épreuve : satellites, lanceurs, charges utiles, etc.

CEC19 en bref :
- Diélectrique NPO qui présente une très grande stabilité
- Capacité maximale : 330pF à 10V, 120pF à 16V et 100pF à 25V,
- Grande plage de température : -55°C à 125°C

CNC19 en bref :
- Diélectrique X7R qui offre une grande capacité
- Valeurs de capacité élevées : de 68pF à 12nF à 10V, 8.2nF à 16V et 5.6nF à 25V
- Grande plage de température : -55°C to 125°C

Publié le 30 Nov 2017 par Marion Van de Graaf

EuMW 2017 - stand 190

Ultra low ESR, high RF power and high self-resonant frequency The NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0. 3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C @ 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of the NPO low loss rugged dielectrics. NHB series is particularly fit for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment. Typical circuit applications: impedance matching, bypass, feedback, tuning, coupling and DC blocking. 100% invar tuning screws with self-locking system   Invar-36 is a unique Iron-Nickel alloy (64 % Fe / 36 % Ni) sought-after for its very low coefficient of thermal expansion. With 1.1 ppm. K–1 between 0°C and 100°C, Invar-36 is about 17 times more stable than Brass which is the most traditional and common alloy Tuning Elements are made of. The working temperature range in Space is so wide that this property becomes essential for a reliable and stable cavity filter tuning. Self-locking system is a technology commonly used on Tuning Element made of Brass or other soft “easy-to-machine” alloys but is innovative and pretty advanced when applied to hard and tough Invar 36. The design consists of two threaded segments separated by two parallel slots. After cutting both parallel slots, the rotor is compressed in its length in order to create a plastic deformation. Thus, an offset is induced between the two threaded segments which generates a constant tensile stress in the rotor from the moment threaded segments are screwed. High Q Factor Dielectric Resonators Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia has developed with support of ESA and CNES, a new high-end dielectric material, E7000 series, designed for high-end filters where high Q factor is requested. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q factor and the possibility to get all the temperature coefficients upon request. E7000 provides high-performance requested for space use in the frequency range 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ. Typical applications: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.

Exxelia à Space Tech Expo

ESA QPL Film Capacitors PM907S and PM948S are full series of Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used from 50V up to 630V with capacitance values from 22nF up to 47μF. Both series can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Film capacitor Series PM907S and PM948S are ESA QPL certified according to the ESCC Detail Specification No. 3006/025 and 3006/026   Smallest ESA QPL Ceramic Capacitor of the Market Exxelia ranges of low voltage MLCC for surface mounting, CEC19 and CNC19, have achieved the ESA Qualified Part List status under the criteria of the European Space Component Coordination’s (ESCC) 3009/042 and 3009/043 respectively. The  0402 size QPL-qualified parts are available from 10V to 25V, enabling substantial miniaturization and cost-saving. They are available either in the very stable NPO dielectric (type 1) or the high capacitance X7R (type 2). CEC and CNC series combine high capacitance values with high thermal and voltage stability. Versions with polymer terminations are also QPL-certified.   Miniature EMI filters for space application Exxelia’s gold-plated glass-sealed EMI filters SFC030 is the solution of choice to protect several embedded power supplies and data lines.  These small and reliable filters are available up to 5A @ 200V and 22nF.  Available in a Kovar package, the better alternative to steel for enhanced temperature cycling resistance, all Exxelia’s EMI filters for space are ESA qualified according to ESCC 3008. Thanks to this extensive experience in stringent ESA testing, Exxelia is able to adapt the tests of any filter according to any need (example: SMD 20A chip, 0pF capacitor value for an arrays of filters).

En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de cookies pour réaliser des statistiques de visites.