AUSA - Booth# 3938
October 8 - 10 : AUSA (The Association of the United States Army’s) Annual Meeting is the largest landpower exposition and professional development forum in North America.
8-10 October, 2018
Walter E. Washington Convention Center
Larger Batches of High Q-Factor Dielectric Resonators
Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia with the support of ESA and CNES developed the E7000 series that provides a narrow bandwidth with smaller size. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q-factor and the possibility to get all the temperature coefficients upon request. E7000 features the high-performance requested for space use in the frequency range from 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ. Being one of the few manufacturers producing its own raw materials, Exxelia perfectly masters the production of dielectric resonators. Induced by the success of this new range, the company is now able to provide larger batches (up to 20kg of powder) of its E7000 series while keeping the exact same product properties, resulting in opportunities for cost-effective volume fabrication. Typical applications for the E7000 series: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.
SPACE & MILITARY GRADE PASSIVES AT CMSE - BOOTH # B13 -
CMSE is one of the most recognized conference dedicated to the use of component in military and space systems. As a key supplier of highly reliable passive components, Exxelia will be displaying in booth B13, a wide variety of military and space-qualified capacitors (ceramic, tantalum, film, electrolytic aluminum), wound magnetics solutions and EMI/RFI filters. Two new ranges of MIL-qualified tantalum capacitors: MIL39006/22 & MIL39006/25 The recently introduced ranges of MIL-qualified tantalum capacitors will be showcased on the company booth (B13). MIL 39006/22 and MIL 39006/25 respectively equivalent to CLR79 and CLR81 types feature hermetically sealed cylindrical tantalum cases and axial leads are available in T1, T2 T3 and T4 cases with extended capacitance and voltage ratings. MIL 39006/22 is qualified for voltages from 6V to 125V and provides from 1200µF @ 6V to 56 µF @ 125V. MIL 39006/25 is qualified for voltages from 25V to 125V and delivers from 680µF @ 25V to 82 µF @ 125V. Both ranges combine high energy density with a large operating temperature range of -55°C - +125°C and H vibrations and shocks resistance. Alsic 20G, Aluminum Electrolytic capacitors with large operating temperatures Alsic 20G is a range of radial leaded aluminum electrolytic capacitors for typical use in military and aerospace high frequency switch-mode power supplies requiring advanced performance under all operating conditions. Alsic 20G operational rated life is 8,000 hours at rated voltage and 105°C, and provides from 330µF @ 500V to 80 000μF @16V. The range features ruggedized design with insulating aluminum case and tin coated leads. With capacitance stability at high temperature, low inductance and impedance, competitive ESR and high ripple current, these capacitors are perfectly adapted for mission-critical applications. C48X dielectric: NPO and X7R advantages combined Under working voltage, C48X dielectric provides equivalent capacitance values to an X7R material with the advantage of a very low dissipation factor (less than 5.10-4). It can also withstand very high dV/dt, up to 10kV/µs which makes it perfect for pulse and charge/discharge applications for firing units. Exxelia’s C48X capacitors, available from 200V to 5kV with EIA sizes from 1812 to 16080, are ideally suited for power applications where heat dissipation may be detrimental to performances and reliability, such as 400Hz Aircraft, Ignition systems, and Space, or as Precision/filtering capacitance in thermally challenged environment for AC or DC voltage.