Eurosatory - Hall 5A booth # E543
11-15 June, 2018 : Eurosatory, the international land and airland Defence and Security exhibition.
11-15 June, 2018
Innovative new products at Electronica - Booth# B5 312 -
Felsic HV, long lifetime and high voltage screw terminal The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume. Cost-effective common-mode chokes qualified for aerospace Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries. Ceramic capacitors based on the new C48X dielectric New range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10-4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability. Ultra low ESR, high RF power and high self-resonant frequency The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment.
MIL 39006-Qualified Wet Tantalum Capacitors
Exxelia has received the M-Level (1.0%/1000h) MIL-PRF-39006/22 and MIL-PRF-39006/25 qualifications approval for its new ranges of wet tantalum capacitors. MIL 39006/22 and MIL 39006/25 respectively equivalent to CLR79 and CLR81 types feature hermetically sealed cylindrical tantalum cases and axial leads. Both ranges are available in all cases: T1, T2 T3 and T4 with extended capacitance and voltage ratings. MIL39006/22 is qualified for voltages from 6V to 125V and provides from 1200µF @ 6V to 56 µF @ 125V. MIL 39006/25 is qualified for voltages from 25V to 125V and provides from 680µF @ 25V to 82 µF @ 125V. Both ranges combine high energy density with large temperature ranges -55°C up to 125°C and are available with H vibration and shocks features. These state-of-art MIL-qualified wet tantalum capacitors are widely used in avionics applications where high performance and extreme reliability are required. Performance highlights compared to solid tantalum capacitors include more capacitance, higher ripple currents, lower ESR and lower dc-leakage current. “These new ranges introduction leverages our decades of experience in providing high-reliability capacitors for the Military market, and proves Exxelia’s ability to reach the most demanding specifications in terms of product development”, states Exxelia Sales & Marketing VP, Jérôme Tabourel, “We are proud to be part of the few MIL-qualified manufacturers of tantalum capacitors, our flexibility and advantageous lead times will bring new supply perspectives.” MIL39006/22 and MIL39006/25 are available for order now.